6 Tips for Ceramic Tiles Installation
Posted By Claire on October 5, 2012
The details of the renovation process are what we need to pay attention to. Do not underestimate this piece of thin clever tile, whether building exterior or interior space, ceramic tile color, pattern can, for the space to add a lot of aesthetic.
Because the environmental craze worldwide in recent years, safety and environmental protection tiles by consumers. The tile color began to move closer to the natural color.
1. Tile purchase process, you of course, preferred brand image good plant tiles.
The factory has full production capacity, to avoid the need to add in the future or in part for repair, will lack the same types of problems.
The time of purchase, you have to pay attention to the tile surface is flat, touch and texture is very good tile the glaze amount of moderate and smooth, pinhole-free patterns and patterns with three-dimensional.
2. Before purchase, you need to check the tile water absorption, hardness and abrasion resistance.
These indicators should be more than in the standard, so the tiles can be durable.
3. Before construction, workers should be mixed stir fixed ratio of water and cement mortar, adhesives and add certain – so as to ensure the the tiles back of bump texture with cement close contact with each other, so that it is effectively attached to the wall.
4. When paving tiles, you must first Chaming logo on the packaging to determine opened paving tiles of the same batch. To set the baseline, the tiles sequentially emissions.
To do so in order to avoid Puwan the height of the housing, the lack of articulation. Before paving tiles, we want to estimate the thickness of the tiles after construction, to prevent finished all but prominent too high, can not be closed, and other issues – This is especially need to keep in mind!
To reserve drainage holes in the ground, you want to pre-design the slope of the ground. Leaving 23 mm gap between each tile, and set aside space for the expansion of the thermal expansion and contraction.
5. After construction, you should clean brick surface residual cement cleaning immediately, modified tile side seam. Within twelve hours after tiling non trampled on, otherwise it will come to naught.
6. Because of its anti-acid, wear-resistant, easy to scratch and fire proof characteristics, the ceramic tiles are very easy to maintain. Usually just baptize with water, wipe can easily maintenance.
Comments
Leave a Reply