3 Methods to Identify The Pros and Cons of Bathroom Tiles.(11/16/2011)

First, the identification of water absorption. High quality wall and floor tiles, water absorption is very low. High water absorption wall and floor tile after the thermal expansion or contraction of the tiles the tile surface will lead to cracking and peeling off the wall block. The identification method is some tiles indicate the water absorption and can be directly compared. If not, you can droplets brick tea or water in the back, after a few minutes inspect the penetration of water droplets, the more non-absorbent, it means that the lower water absorption, better quality.

The second is to identify the brick. See if the tile is flat, or there is uneven thickness of the pinhole, at the same time, hit the tile to listen to the sound is crisp, it means that the texture of ceramic tile density, better hardness. And try to scratch hard objects brick surface, if the scratches come, then it proves that the tile is lack of glazing. If the glazed surface finish, the tile will be susceptible to contamination, difficult to clean.

Third, identify the color. Put a few pieces of ceramic tile together, look carefully in the light, a good product color is small, consistent color between products; while larger color difference of the product, the product between the color shades.

(Author Mosaic and Tile, China Leiyuan 11/16/2011)

Previous News:
What is Full Body Tile?(11/15/2011)

Next News:
Innovation, in addition to technical as well as services(11/18/2011)