1.      Preparation of the wall surfaces

Make sure the wall surfaces to be smooth, flat, solid, dry and perfectly clean. We suggest creating a white base about 2mm.

2.      Preparation for laying

Score lines on the surfaces to help the sheet posited correctly.

3.      Laying

Using the straight of a trowel spread out the adhesive uniformly on the wall. Make sure the adhesive covered all the surface .One time should be not more than 1m².

A---Mosaic mounted on paper Install the mosaic sheets with the paper side facing towards you and then using rubber float to ensure perfected adhesion. Wet the paper with a damp sponge and the remove it gently .Take out of any excess adhesive before it dries by a small spatula.

B---Mosaic mounted on mesh, Press the fiberglass mesh backing directly into the adhesive.

4.      Grouting

Using a grout for particular care. For paper-faced mosaic, ensure that tiles are thoroughly cleaned and spread the grout using a rubber float. Make sure no more than 2m² of area at a time. And the leave the grout drying.

5.      Cleaning

Using a damp sponge to remove any grout.

6.      Cutting glass mosaic

Using mosaic nippers cut tile by tile.

Using a cutter for cutting the whole sheet.

7.      Maintenance

Using normal neutral detergents for daily cleaning.

Using a slightly acidic detergents for special cleaning.

The following instructions are for laying mosaics in swimming pool

Make sure the pool is dry and a static test has been carried out on the structure. No water is covered for at least 20 days after laying has been completed. Keeping the substrete temperature between 5℃-30℃.

Grind down irregularities in the concrete with wire brushes or a flexgrinder.

For special or heavy-duty cleaning .We recommend using a slightly acidic detergent.