1. Preparation of the wall surfaces
Make sure the wall surfaces to be smooth, flat, solid, dry and perfectly clean. We suggest creating a white base about 2mm.
2. Preparation for laying
Score lines on the surfaces to help the sheet posited correctly.
3. Laying
Using the straight of a trowel spread out the adhesive uniformly on the wall. Make sure the adhesive covered all the surface .One time should be not more than 1m2.
A---Mosaic mounted on paper Install the mosaic sheets with the paper side facing towards you and then using rubber float to ensure perfected adhesion. Wet the paper with a damp sponge and the remove it gently .Take out of any excess adhesive before it dries by a small spatula.
B---Mosaic mounted on mesh, Press the fiberglass mesh backing directly into the adhesive.
4. Grouting
Using a grout for particular care. For paper-faced mosaic, ensure that tiles are thoroughly cleaned and spread the grout using a rubber float. Make sure no more than 2m2 of area at a time. And the leave the grout drying.
5. Cleaning
Using a damp sponge to remove any grout.
6. Cutting glass mosaic
Using mosaic nippers cut tile by tile.
Using a cutter for cutting the whole sheet.
7. Maintenance
Using normal neutral detergents for daily cleaning.
Using a slightly acidic detergents for special cleaning.
กก
The following instructions are for laying mosaics in swimming pool
Make sure the pool is dry and a static test has been carried out on the structure. No water is covered for at least 20 days after laying has been completed. Keeping the substrete temperature between 5¡æ-30¡æ.
Grind down irregularities in the concrete with wire brushes or a flexgrinder.
For special or heavy-duty cleaning .We recommend using a slightly acidic detergent.
|